Help Me to setup the KDS K7XII transmitter

[malaypilot]

Anyone can help me to setup the KDS K7XII with my KDS 450s???
I was bind the receiver and i was completed the plug and follow the manual..
but the servo not move like normal..
that transmitter...i was change the mode 1 to mode 2...
can help me??

MalayPilot

[sjschultz]

Is this a continuation from your last thread ?
http://myrcguide.com/index.php?topic=13626.msg142966#msg142966

I post a pic there for how the RX needs to be connected to the servos, so it will be the same for any Heli you put it in.

By changing from Mode 1 to Mode 2 on the TX, the only thing your changing is swapping the "Mode 1" Throttle (Right) / Elevator (Left) to "Mode 2" Throttle (Left) / Elevator (Right)
All other controls will remain the same.

You do not need to change any other settings in the TX itself.
If you have made any further changes to the TX settings, I cannot help you as I have zero experience with that TX.
It will be trial and error as to what you need to do to fix it.

Unless someone else comes along with knowledge of that TX  

[malaypilot]

thankz...now my heli is complete..i was repair on myself...and that heli like normally...and good fly...thanks all