Author Topic: Papa's quadcopter build (Read 4009 times)

pinguin6218 · « **Reply #60 on:** May 14, 2012, 11:38:59 PM »

Quote from: RCREDHOTS on May 14, 2012, 05:24:32 PM

Papa
I forgot to say the battery I am using on the tri copter is a 2600ma 40c and that's only giving me 5 safe minutes, not sure what the problem is I change the motors .
I am going to down size the props to 10-74 I am using 11-47 may be too large.
But I have to say bigger is better and more stable.
The quad is like a rocket added a red plex disk on the front so I can tell the front from the back

RCREDHOTS

What is your motor temperature with 11-47 prop?

papascotimini · « **Reply #61 on:** May 15, 2012, 10:42:42 AM »

That looks really good AK

I'll follow your advice Caddmus, sounds like a better idea than mine

Happy Flying

Papa

caddmus · « **Reply #62 on:** May 15, 2012, 12:10:00 PM »

Because of your thread I am thinking seriously to build a quadcopter Papa

I can see a quadcopter in my future

papascotimini · « **Reply #63 on:** May 15, 2012, 12:41:47 PM »

That's really nice Cad

Let us know if you end up buying one

Happy Flying

Papa

papascotimini · « **Reply #64 on:** May 15, 2012, 01:28:50 PM »

pinguin

What blades are you using on your quad? Did you have to drill them to fit the prop adapter?

Thanks

Happy Flying

Papa

QMaverick · « **Reply #65 on:** May 15, 2012, 02:20:37 PM »

My Quad kit has finally reached the Netherlands... But now Customs have it...

RCREDHOTS · « **Reply #66 on:** May 15, 2012, 06:15:26 PM »

@ AKPHill
Looks good!

If I may ask what board is it?
I am using a 4000 on my quad been work great! I may try a 4400.
I will as soon as it uploads post a link to a video of my Quad but it was late in the day so it may be a little dark.

RCREDHOTS

RCREDHOTS · « **Reply #67 on:** May 15, 2012, 06:19:33 PM »

Quote from: pinguin6218 on May 14, 2012, 11:38:59 PM

Quote from: RCREDHOTS on May 14, 2012, 05:24:32 PM
Papa
I forgot to say the battery I am using on the tri copter is a 2600ma 40c and that's only giving me 5 safe minutes, not sure what the problem is I change the motors .
I am going to down size the props to 10-74 I am using 11-47 may be too large.
But I have to say bigger is better and more stable.
The quad is like a rocket added a red plex disk on the front so I can tell the front from the back

RCREDHOTS

What is your motor temperature with 11-47 prop?

I just checked them I had 2 of the 3 at 79F and 1 at 84F 9 (outside temp 79F)
I may ----------one more time change the motors on the tri copter to the ones I am using on the quad!

They been doing great (KNOCK ON WOOD)

RCREDHOTS

AKPHill · « **Reply #68 on:** May 15, 2012, 10:08:26 PM »

It's a free flight board version 1.3.1
It's capable of doing tri quad and hex

pinguin6218 · « **Reply #69 on:** May 16, 2012, 02:58:40 PM »

Quote from: papascotimini on May 15, 2012, 01:28:50 PM

pinguin

What blades are you using on your quad? Did you have to drill them to fit the prop adapter?
Thanks

Happy Flying

Papa

I use this prop.
I don't have to drill anything. It fit perfectly.

papascotimini · « **Reply #70 on:** May 16, 2012, 03:16:41 PM »

Thanks. The ones I'm using won't fit the prop adapter. I'll order the blades you are using when they are back in stock.

Happy Flying

Papa

papascotimini · « **Reply #71 on:** June 17, 2012, 12:08:41 PM »

guys

Everything needed to build my quad should be here next week and I'm going to start configuring the electronics. Could you tell me the motor diagram for a + configuration (I have opted for + instead of x) and do I need to cut the BEC wire on the ESC if I'm using this board: http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=21977 or can I leave all the BEC wires intact?
Thanks

Happy Flying

Papa

RCREDHOTS · « **Reply #72 on:** June 17, 2012, 01:47:24 PM »

Quote from: papascotimini on June 17, 2012, 12:08:41 PM

guys

Everything needed to build my quad should be here next week and I'm going to start configuring the electronics. Could you tell me the motor diagram for a + configuration (I have opted for + instead of x) and do I need to cut the BEC wire on the ESC if I'm using this board: http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=21977 or can I leave all the BEC wires intact?
Thanks

Happy Flying

Papa

Hey Papa

Disconnect all but one from the 4 esc, I removed the wires from the plug and fold them back.(center wire TAPE OR HEAT SHRINK)
I like the + config not sure if I went to the X config I could fly the Quad.
Motor rotation and placement and prop rotation should be at the link below
http://www.kkmulticopter.kr/index.html?modea=manual

RCREDHOTS

papascotimini · « **Reply #73 on:** June 17, 2012, 02:29:09 PM »

Thank you very much RC

Happy Flying

Papa

papascotimini · « **Reply #74 on:** June 19, 2012, 03:40:05 PM »

Got pretty much everything soldered but I have encountered a problem, the ESC battery cables won't fit my battery bullet connector. What can I do to make them fit? I have 4mm JST-XH bullet connectors.
Thanks

Happy Flying

Papa

Subject / Started by	Replies	Last post
Papa's HK250GT build Started by papascotimini « 1 2 3 » 6ch Collective Pitch Helicopters	30 Replies 931 Views	May 21, 2012, 02:30:03 PM by LawnDarts
Papa's quadcopter maiden flight Started by papascotimini « 1 2 » RC Videos	29 Replies 1052 Views	August 07, 2012, 04:47:28 PM by RCREDHOTS
New video: Papa's quadcopter flying Started by papascotimini « 1 2 » RC Videos	15 Replies 468 Views	August 12, 2012, 03:43:30 PM by highflyer(USCG)

News: